Description
***PACKAGE*** 7 x ea Transmitter and 7 x ea Receiver **No gigabit switch included.
Introducing our New Brightlink 4K HDMI over IP (POE VERSION) Any Size Matrix Distribution System with built in Video Wall Processor and controllable with Brightlinks free Pro Control App for IOS and Android.
Brightlinks 4K HDMI over IP Matrix system is a flexible distribution system that allows you to create any size matrix configuration from 2 input to 2 outputs, all the way up to 100 inputs to 100 outputs and more, and easily switch them in any combination with our Brightlink Pro-Control APP.
Brightlinks HDMI over IP Transmitters and Receiver work with Brightlink 24 port Gigabit switch as well as most off the shelf switches as long as they support IGMP snooping and HDCP. These are POE Version which requires a POE Switch
The Transmitters (TX) convert your HDMI signal from your source into IP signal and send via Cat6 cable into your network switch where it is then distributed to your Receivers (RX) via Cat6 cable and converted back to HDMI signal to be connected to your displays.
This IP Matrix system allows you to send 1080p, 4K@30hz, USB, IR and RS232 over long distances using IP networks with Cat5e/6 and Fiber cable (single mode- module insert not included).
The H.264 compression allows for the video signal to be sent over these long distances and at the same time maintaining a crisp clear image.
The Built in Video Wall Controller, along with Brightlink’s Pro-Control APP, allows you to create multiple video walls in sizes up to 8 vertical x 16 horizontal each, and easily switch your source / content to them.
The Video Wall Controller also supports edge / bezel adjustment and image rotation which allows you to rotate your image 180 or 270 degrees to create vertical digital signage display walls, eye catching mosaic video walls, and more.
This Brightlink 4K HDMI over IP Any Size Matrix Distribution System is a one stop solution for extending HDMI over Cat6 / Fibre cables, and creating eye-catching Video Wall and Digital Signage Displays which can be used in Hotels, Casinos, Sports Bars, Super Markets, Shopping Malls, Churches, Data Control Centre, Conference Rooms, Education and Training, Luxury Homes and Home Theaters.
TRANSMITTER FEATURES:
POE Transmitter ( Transmitter gets power from switch so no power supply at TX required) 4K @ 30Hz HDMI over IP Matrix / Distribution System
400ft / 120m Distances into and out of switch over single Cat5e/6 cable
Matrix configuration allows for any amount of inputs (TX) to any amount outputs (RX)
Control with Brightlink’s IOS and Android Control APP.
Built-In Video Wall Controller allows you to create multiple Video Walls each up to 8 Vertical x 16 Horizontal Displays.
Rotate screen Image from 180 to 270 degree
Bezel / Edge adjustment
H.264 Video compression
Compatible with most Gigabit switches that support IGMP & DHCP
Allows USB 2.0 passthrough
RS232 bi-directional extension and RS232 control
4 bits dip switch for 16 stream channel selection
Support Dolby True HD, DTS-HD Master Audio
Support two-way Wide Band IR extension (38khz-56khz) - Control Source device from Display or Display from Source device.
Transmitter over Fiber Optical cable up to 60km (Single mode- module insert not included)
HDCP 1.4 compliant
RECEIVER FEATURES:
(Receiver gets power from switch so no power supply at RX required)
4K @ 30Hz HDMI over IP Matrix / Distribution System
400ft / 120m Distances into and out of switch over single Cat5e/6 cable
Matrix configuration allows for any amount of inputs (TX) to any amount outputs (RX)
Control with Brightlink’s IOS and Android Control APP.
Built-In Video Wall Controller allows you to create multiple Video Walls each up to 8 Vertical x 16 Horizontal Displays.
Rotate screen Image from 180 to 270 degree
Bezel / Edge adjustment
H.264 Video compression
Compatible with most Gigabit switches that support IGMP & DHCP
Allows USB 2.0 passthrough
RS232 bi-directional extension and RS232 control
4 bits dip switch for 16 stream channel selection
Support Dolby True HD, DTS-HD Master Audio
Support two-way Wide Band IR extension (38khz-56khz) - Control Source device from Display or Display from Source device.
Transmitter over Fiber Optical cable up to 60km (Single mode- module insert not included)
HDCP 1.4 compliant
7 X TRANSMITTER PACKAGE CONTENTS:
- 2x screws
- Rear bracket x2
- Power adapter DC 5V
- 1xIR TX cables, 1x IR RX cables
- Operating Instruction manual
- 1x Phoenix plugs for RS232 cable termination
- Main Unit. HDMI Extender (Transmitter only)
7 X RECEIVER PACKAGE CONTENTS:
- Main Unit. HDMI Extender (Transmitter & Receiver)
- Power adapter DC 5V x2PCS
- 1xIR TX cables, 1x IR RX cables
- 1x Phoenix plugs for RS232 cable termination
- 2x screws
- Rear bracket x1
- Operating Instruction manual
TRANSMITTER SPECIFICATIONS:
Performance: | |
Protocol | TCP, UDP, RTSP, RTP, DHCP, IGMP, Multicast, IPV4 |
Support Video format | 480i/480p/576i/576p/720p/1080i/1080p@60HZ |
Support Audio format | Stereo 192Kbps |
HDCP | Compliant |
IR Frequency | 38 -56 KHZ |
RS232 Baud rate | Default 115200bps, total 8 kinds optional |
IP setting &Group ID setting: | |
Default IP | Automatic allocation |
Group ID | Group 00 ~ group 16 |
Request for Switch/Router | Support IGMP, support DHCP |
Connectors on Transmitter | |
Input | 1xHDMI Female port |
Output | 1x RJ45 output, 1x Fiber output |
RS232 | Phoenix RS232 port |
IR |
1x IR TX port; 1x IR RX port |
Support 38K-56KHz | |
Connectors on Receiver: | |
Input | 1xRJ45 input, 1x Fiber input |
Output | 1x HDMI Female port |
RS232 | Phoenix RS232 port |
IR |
1x IR TX port; 1x IR RX port |
Support 38K-56KHz | |
Environmental & Power Requirements: | |
Operating temperature | -5 to +35 ℃ (+23 to +95℉) |
Operating Humidity Range | 5 to 90%RH (No Condensation) |
Power supply | DC 5V |
Power consumption | Max 3 watt |
Physical: | |
Dimension | TX: 160x103.2x30mm ; RX: 160x103.2x30mm |
Net Weight | TX: 0.28KG ; RX:0.28KG |
RECEIVER SPECIFICATIONS:
Performance: | |
Protocol | TCP, UDP, RTSP, RTP, DHCP, IGMP, Multicast, IPV4 |
Support Video format | 4K@30HZ, 1080P/1080i/720P/576P/576i/480P/480i |
Support Audio format | Stereo 192Kbps |
HDCP | Compliant |
IR Frequency | 38 -56 KHZ |
RS232 Baud rate | Default 115200bps, total 8 kinds optional |
IP Setting & Group ID Setting: | |
Default IP | Automatic allocation |
Group ID | Group 00 ~ group 16 |
Request for Switch/Router | Support IGMP, support DHCP |
Connectors on Transmitter | |
Input | 1xHDMI Female port |
Output | 1x RJ45 output, 1x Fiber output |
RS232 | Phoenix RS232 port |
IR |
1x IR TX port; 1x IR RX port |
Support 38K-56KHz | |
Connectors on Receivers: | |
Input | 1xRJ45 input, 1x Fiber input |
Output | 1x HDMI Female port |
RS232 | Phoenix RS232 port |
IR |
1x IR TX port; 1x IR RX port |
Support 38K-56KHz | |
Enviromental and Power Requirements: | |
Operating temperature | -5 to +35 ℃ (+23 to +95℉) |
Operating Humidity Range | 5 to 90%RH (No Condensation) |
Power supply | DC 5V |
Power consumption | Max 3 watt |
Physical: | |
Dimension | TX: 160x103.2x30mm ; RX: 160x103.2x30mm |
Net Weight | TX: 0.28KG ; RX:0.28KG |
4K UHD HDMI over IP extension
Shipping & Returns
Some products have their own terms and conditions on the product page which you much accept before you can purchase. The general terms and conditions below do not apply if a products has an individual terms and conditions in place on it’s product age. If a product does not have an individual terms and conditions it will default to the following general terms and condition which is: “Returns are accepted up to 30 days after the purchase date for a full refund minus the original shipping cost. Returns are only accepted for Unopened Unused products. Open boxes or used / installed items are subject to a restocking fee of 10-30% dependding on the condition of the item after inpsection by our warehouse.
Customers returning items are responsible for the return shipping cost to a selected warehouse in the USA.
Returns are not accepts without a RMA#. Please allow 1-2 weeks for refunds to be processed after the return product is received. To request a return please send an email with your order number and a reason for return to support@brightlinkav.com
Reviews
Support
Need to contact us? Go here