The VX1000 is NovaStar's newall-in-one controller that integrates video processing and video control into one box. It features10 Ethernet ports and supports video controller, fiber converter and Bypass working modes. A VX1000 unit can drive up to 6.5 million pixels, with the maximum output widthand heightup to10,240 pixels and 8192 pixels,respectively, which is idealfor ultra-wide and ultra-high LED screen applications.
The VX1000 is capable of receiving a variety of video signals and processing high-resolution 4K.1K@60Hz images. In addition, the device features stepless output scaling, low latency, 3D, pixel-level brightness and chromacalibration and more, to present you with an excellent image display experience.
What's more,the VX1000 can work with NovaStar's supreme software NovaLCT and V-Can to greatly facilitate your in-field operations and control, such as screen configuration, Ethernet port backup settings, layer management, preset management and firmware update.
Thanks to its powerful video processing and sending capabilities and other outstanding features, the VX1000 can be widely used in applications such as medium and high-end rental, stage control systems and fine-pitch LED screens.
● Input connectors
− 1x HDMI 1.4 (IN & LOOP)
− 1x HDMI 1.4
− 1x DVI (IN & LOOP)
− 1x DVI
− 1x 3G-SDI (IN & LOOP)
− 1x 10G optical fiber port (OPT1)
● Output connectors
− 10x Gigabit Ethernet ports
A single device unit drives up to 6.5 million pixels, with a maximum width of 10,240 pixels and a maximum height of 8192 pixels.
− 2x Fiber outputs" "OPT 1 copies the output on 10 Ethernet ports.
OPT 2 copies or backs up the output on 10 Ethernet ports.
− 1x HDMI 1.3
For monitoring or video output
● Self-adaptive OPT 1 for either video input or sending card output
Thanks to the self-adaptive design, OPT 1 can be used as either an input or output connector, depending on its connected device.
● Audio input and output
− Audio input accompanied with HDMI input source
− Audio output via a multifunction card
− Output volume adjustment supported
● Low latency
Reduce the delay from the input to receiving card to 20 lines when the low latency function and Bypass mode are both enabled.
● 3x layers
− Adjustable layer size and position
− Adjustable layer priority
● Output synchronization
An internal input source or external Genlock can be used as the sync source to ensure the output images of all cascaded units in sync.
● Powerful video processing
− Based on SuperView III image quality processing technologies to provide stepless output scaling.
− One-click full screen display
− Free input cropping
● Easy preset saving and loading
− Up to 10 user-defined presets supported
− Load a preset by simply pressing one button
● Multiple kinds of hot backup
− Backup between devices
− Backup between Ethernet ports" "− Backup between input sources
● Mosaic input source supported
The mosaic source is composed of several input connectors of the same type.
● Up to 4 units cascaded for image mosaic
● Three working modes
− Video Controller
− Fiber Converter
● All-round color adjustment
Input source and LED screen color adjustment supported, including brightness, contrast, saturation, hue and Gamma
● 3D function
Work with the EMT200 3D emitter and matched 3D glasses to present a 3D visual experience.
● Pixel level brightness and chroma calibration
Work with NovaLCT and NovaStar calibration software to support brightness and chroma calibration on each LED, which can effectively remove color discrepancies and greatly improve LED display brightness and chroma consistency, allowing for better image quality.
● Multiple operation modes
Control the device as you wish via V-Can,
NovaLCT or device front panel knob and buttons.
- V-Can Support;
- Supports up to 3x layers;
- Memory for 10 presets;
- Cascading via USB possible;
- Display configuration without computer possible;
- Control via USB or LAN;
- Supply voltage: AC 100-240V, 50/60HZ;
- Dimensions: 483.6 x 351.2 x 50.1mm (WxDxH);
- Power consumption: 28 watts;
- Weight: 4kg;
FIBER EXTENTION APPLICATION
Shipping & Returns
Some products have their own terms and conditions on the product page which you much accept before you can purchase. The general terms and conditions below do not apply if a products has an individual terms and conditions in place on it’s product age. If a product does not have an individual terms and conditions it will default to the following general terms and condition which is: “Returns are accepted up to 30 days after the purchase date for a full refund minus the original shipping cost. Returns are only accepted for Unopened Unused products. Open boxes or used / installed items are subject to a restocking fee of 10-30% dependding on the condition of the item after inpsection by our warehouse.
Customers returning items are responsible for the return shipping cost to a selected warehouse in the USA.
Returns are not accepts without a RMA#. Please allow 1-2 weeks for refunds to be processed after the return product is received. To request a return please send an email with your order number and a reason for return to email@example.com
Need to contact us? Go here