This Matrix Switcher SET over Cat5/6 cable provides intuitive management of several sources of output to several displays. For a full set of features, please refer to the User Manual. The following specifications pertain:
• 32 x 36 HDMI Matrix Switcher SET with LCD
• Remote control
• HDCP compliant
• Extends upto 200ft away
• C/W 36 sets of EX60-3DIR
• Supports RS232 pass-through
• Variable gain technology enables gain level adjustment
• C/W Free 7" tablet with controls software for WIFI control
• Supports Point-to-Point, Point-to-Many and Many-to-Many network configuration
• Relationship/interconnectivity settings between Input and Output channels can be saved and recalled
This Brightlink HDMI Matrix Switcher enables up to 36 HDMI video inputs to be routed up to 36 HDMI outputs via HDMI cable. It can be one input to one output, or one input to all outputs, or any combination.
This Matrix Switcher can be used at Casinos, Sports Bars, Super Markets, Shopping Malls, Churches, Data Control Centers, Conference Rooms, Education and Training facilities, Custom Home Theatres or any application requiring multiple HD sources to multiple HD display set-ups.
This Brightlink HDMI Matrix Switcher contains a high performance and variable gain technology processor. Circuit buffering circuits and frequency compensation ensures signal clarity and transmission stabilization, especially over longer transmission distances. The Matrix Switcher is equipped with short circuit protection, LCD display, embedded intelligent system, RS232 port, RJ-45 port and various intelligent remote control compatibility. This matrix comes set at 110v for North American Standards but can easily be switched to 220v for international customers. This matrix can be used with one of our many HDMI extenders over HDBaset, Cat5/6, IP, HD-SDI / Coaxial RG59, and even Fibre optic. Here are our best selling: SX-EH100, SX-EX12, SX-EF20, SX-EX11, SX-EX60-3DIR, EX-EX24, HSD1-SDH1-SET
With your Matrix Switcher you will receive:
• Instruction CD x1
• Power Adapter x1
• Matrix Switcher x1
• Operation Manual x1
• RS232 Serial Cable x1
• Remote control
• Software control via spliced LCD
• Control panel on the front of matrix
• WIFI control through andriod app (see diagram below)
• Software control via RS232 (details are stated in the manual)
|Compatible with||HDMI1.4, HDCP2.2, DVI1.0|
|Pixel bandwidth||225MHx, full digital|
|Interface bandwidth||3.25Gbps, full digital|
|Max. resolution||Normal-PC: 1600x1200@60_24bit|
|Rise time||<0.3Tbit (20-80%)|
|Fall time||<0.3Tbit (20-80%)|
|Max. propagation delay||5ns (±1ns)|
|Signal strength||T.M.D.S. ±0.4Upp|
|Min./Max. level||T.M.D.S., 2.9V/3.3V|
|Input EDID||EDID Field Re-writeable|
|Control Interface||RS-232, 9-pin female D connector|
|Baud rate and protocol||Baud rate: 9600, Data bits: 8, Stop bits: 1, no parity|
|Size (Inch)||16 x 16 Case: 19”W x 6”H x 11”D 32 x 32 Case: 19”W x 12”H x 11”D
|Power supply||110V North American or 220V International
Terms / Conditions
Shipping is $35 (USD) to anywhere in the USA; allow seven to ten (7-10) business days for your item to be delivered. Please contact for international shipping cost and transit times. This set comes with 2-YEAR FREE WARRANTY on Parts and Labor.
In the event of malfunctions or an inoperative switch, we will pay for the shipping cost both ways. Keep ordering information to expedite the return process. For international customers you will be responsible for the return shipping cost back to the manufacture.
Detailed RS232 and software set-up are in the User Manual.
Brightlink HDMI Matrix Switcher Quick Guide
STEP 1: INSTALL the HDMI Matrix Switcher in a well ventilated area, ensuring the side panels are clear.
STEP 2: ENSURE the input sources (such as Blu-ray player) is turned OFF prior to connection to avoid system damage.
STEP 3: CONNECT the HDMI input sources to the Matrix Switcher via HDMI cable. Also connect the output to the Matrix Switcher via HDMI cable.
STEP 4: POWER UP all units: Matrix Switcher, sources and displays.
STEP 5: CONTROL the matrix switcher by the panel to perform switching, OR by the software via RS232 (details are included in the User Manual).
STEP 6: TEST the units' operation by selecting the Input and Output via computer/control panel, ensuring that the correct signal is displayed.