This 16x16 Matrix Switcher provides intuitive management of several sources of output to several displays. For a full set of features, please refer to the User Manual. The following specifications pertain:
This 16x16 HDMI Matrix Switcher enables 16 of 16 HDMI video inputs to be routed to many HDMI outputs. It can be one input to one output, or one input to all outputs, or any combination (4x16, 8x16, 12x12, 16x16, etc.)
HDMI Matrix Switcher contains a high performance and variable gain technology processor. Circuit buffering circuit and frequency compensation ensures signal clarity and transmission stabilization, especially over longer transmission distances. The Matrix Switcher is equipped with short circuit protection, LCD display, embedded intelligent system, RS232 port, RJ-45 port (optional) and various remote control device compatibility.
Any ports on the Matrix can act as "Input" or "Output"—simplifying set-up since those parameters can be inputted via PC settings.
With your 16x16 Matrix Switcher you will receive:
|Compatible with||HDMI1.4, HDCP1.3, DVI1.0|
|Pixel bandwidth||225MHx, full digital|
|Interface bandwidth||3.25Gbps, full digital|
|Rise time||<0.3Tbit (20-80%)|
|Fall time||<0.3Tbit (20-80%)|
|Max. propagation delay||5ns (±1ns)|
|Signal strength||T.M.D.S. ±0.4Upp|
|Min./Max. level||T.M.D.S., 2.9V/3.3V|
|Input EDID||EDID Field Re-writeable|
|Control Interface||RS-232, 9-pin female D connector|
|Baud rate and protocol||Baud rate: 9600, Data bits: 8, Stop bits: 1, no parity|
|Size (mm)||1U height, 580(L)x44(W)x240(H)|
|Power supply||100VAC -240VAC, 50/60Hz|
Terms / Conditions
Shipping: for a cost of $35 (USD), we will ship the Matrix Switcher anywhere in the USA; allow four to seven (4-7) business days for item delivery.
This set comes with 2-YEAR FREE WARRANTY on Parts and Labor. In the event of malfunctions or an inoperative switch, we will pay for return shipping and will reimburse original shipping costs. Keep ordering information to expedite the return process.
Detailed RS232 and software set-up are in the User Manual.
Brightlink 32x32 HDMI Matrix Switcher Quick Guide
STEP 1: INSTALL the 32x32 HDMI Matrix Switcher in a well ventilated area, ensuring the side panels are clear.
STEP 2: ENSURE the input sources (such as Blu-ray player) is turned OFF prior to connection to avoid system damage.
STEP 3: CONNECT the HDMI input sources to the Matrix Switcher via HDMI cable. Also connect the output to the Matrix Switcher via HDMI cable.
STEP 4: POWER UP all units: Matrix Switcher, sources and displays.
STEP 5: CONTROL the matrix switcher by the panel to perform switching, OR by the software via RS232 (details are included in the User Manual).
STEP 6: TEST the units' operation by selecting the Input and Output via computer/control panel, ensuring that the correct signal is displayed.